Lithofin KF Cement Res Remover 1 litre

Description
A special product from the LITHOFIN-Range for ceramics, quarry and porcelain tiles (KF/FZ). Lithofin KF Cement Residue Remover is a highly active cleaning concentrate based on a special composition of acids and supporting agents. The product is nearly odourless and does not develop any vapours.

Technical Data:
Density: 1.09 g/cm³
pH-Value: &lt,1 (concentrate)
Appearance: clear, orange
Odour: pleasant
Solubility in Water: very good

Properties
Lithofin KF Cement Residue Remover dissolves anorganic deposits such as cement and mortar residues, efflorescence, rust and calcium deposits. The dirt can then be completely removed from the surface.

Field of Use
Due to its mild odour, Lithofin KF Cement Residue Remover is particularly suitable for indoor use. For cleaning all ceramic surfaces, which need to be cleaned after laying and grouting. The original appearance of the surface is restored.
Surfaces: suitable for all acid resistant ceramic wall and floor tiles, quarry tiles, porcelain, clay and brick as well as terracotta surfaces.

Directions for Use
Dilute Lithofin KF Cement Residue Remover approx. 1:5 to 1:15 with water depending on the stubbornness of the deposits. Apply the solution to the wet surface and spread with a brush or scrubber. After several minutes, remove the solution from the surface with a wiping cloth or a wet and dry vac. Rinse well with clear water. In case of stubborn deposits, repeat this procedure with a lower degree of dilution or undiluted.
Please Note: always test the product in an inconspicuous area prior to use. Acid sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes.
Coverage: approx. 15 to 30m² depending on the type and degree of dirt

Storage
Keep closed and cool. Shelf life of up to five years.

Environmental Protection
The contained surfactants are biologically degradable according to EU-regulations. Free of phosphates.
Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyetylene (PE). Clean containers can be recycled through collection system.

Safety
Contents: non-ionic surfactants, acids, auxiliary agents.
Labelling according to EG-Guideline 199/45/EG: Symbol Xi, irritant.
Risk and Safety Phrases: irritating to eyes and skin. Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label.
First Aid Procedures: Remove contaminated soaked clothing immediately. In case of inhalation, take in fresh air. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment.
Emergency Procedures: in case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Product does not burn, fire-extinguishing activities according to surrounding.

Packaging
a) 1 litre bottle with child-proof cap (12 per box)
b) 5 litre canister (4 per box)